How to Level Your Camper

petesrvblog RV Owner Tips

Pete’s RV-TV YouTube Channel Resident RV Expert Randy Murray provides step-by-step instruction for leveling a camper. For his demonstration, Randy uses a Keystone Cougar Xlite 28RBS travel trailer. Proper techniques include slideroom out first and then leveling left to right, using an arm’s length to gauge enough space for slideout to open, and putting down stabilizer jacks after the camper is successfully leveled.

Video Transcript for “How to Level Your Camper”

Randy: Hey, folks. Randy here with Pete’s RV TV today. We’re in the gravel pit, behind the Pete’s RV, the South Burlington Vermont dealership. And I’m gonna give you a couple tips on, the best way to put your new camper, on your campsite and get it leveled up so you guys can enjoy your, your camping weekend with your new RV.

    Today we’re here and we got a brand new, Cougar X-lite, 28RBS that we’re gonna be using for our test model. And so I’m just gonna give you a couple tips and, here we go.  All right so here we are, backing them to our campsite. So all you wanna do is just kinda line up and pick your spot that you want the camper to be on the campsite and then, go ahead and back ride up, onto the site.

    That looks pretty good right there. All right, so now that we’ve backed on, our desired spot on, our campsite at, at a local campground or wherever we might be camping this weekend. Good judges. I know we don’t have any trees right here in, in the gravel pit, but most campsites do have some trees. So how I judge the distance to my slide, for trees that may be in the area is I … I simply put my back against the camper and put my arm out.

    Now, the end of my fingers represents, a slide that’s fully out. So if there’s any trees close by, this is, a great way to kinda measure it with, all the stuff that you have available on you all times. So make sure there’s no trees in the way, end of the fingers is a good judge. Okay, here we are on our next step.  As you can see, I still have the trailer hooked to the truck and I’ve gone inside and I’ve actually run my slide out out.

    Now when we put a slide out out, that’s gonna shift the way on the trailer and actually make it lean to the slide outside a little bit. So we need to compensate for that when get to slide that out and we get on the slide to make this thing level. Now, on this camper here, I’ve installed a couple levels on the side that we can purchase, in the Pete’s RV Store, or Pete’s RV online. This just really helps level on the camper easy spots to see as we’re doing it on the driver’s side of the vehicle.

    So, I’m looking at my level here and it looks like we’re leaning a little bit to the slides, as I mentioned we may be. So what I’m going to do is, mark where my wheels are and I’m going to, pull the truck ahead a little bit and make some adjustments onto the wheels so we level this camper out. All right, so here we are in the back of our trailer. Now, I’ve marked my wheels and I’ve pulled the truck ahead just a hair because I’m gonna back up onto this block here to help level the camper out.

    Now a lot of people think that they can level a camper with a stabilization jacks. That’s not really the case. These guys are just more meant to stabilize the camper you know, give a stability once we are leveled. They’re not meant to lift the weight of the camper to compensate for the weight to slide the, transverses onto the side. So what a misconception there, but if you do it this way, you’re gonna be right and you’re not gonna hurt your jacks.

    So what I’m gonna do now is I’m gonna get back in the truck and I’m gonna back up onto this block here which will lift this side of the camper and hare, give us a nice level floor inside. All right, so as you can see, I backed the truck up now, with the trailer and we’ve backed it onto our tri-leveler and I’ve checked the levels in the front. So we’ve got our left to right level now. We’ve compensated for putting the slide out out.

    So what I wanna do at this point is go ahead and put my wheel chock in front of this wheel here so the trailer can’t low, roll forward once I unhook the chock. And once I unhook the chock, we can get our front to back level and then we’re gonna be camping. So as you can see here we’ve backed up on the tri-leveler and I have installed the wheel chock in front of the wheel. So when we unhook the trailer from the truck, we won’t roll forward.

    All right, so as you can see I’ve unhooked the truck from the camper and at this point, we’ve already got our left to right level as we saw a little bit earlier in the video. Now we wanna get our front to back level. So again the truck unhook from the camper. I’m gonna look at the level on the side right here and I’m seeing I’m sitting a little bit high in the front from unhooking from the truck. So I wanna go ahead and, use my tongue jack to lower the camper this works really easy than electric tongue jack as well. (Turns the tongue jack).

    So that looks pretty good right there. So now, we’ve got our left to right level, we’ve got our front to back level. We can go ahead and, put down the stabilization jacks. Okay, so here we are at the stabilization jacks if your camper has electric, stabilizes on it, you go ahead and run them down. This particular one here has the manual operation. I like to use, my screw gun with the appropriate size sucking on it. Run the jack to the ground and snag it up.

    So to finish up by running around to the other three jacks on the camper, I went ahead and put those down. So we’re a level after right, front to back, all the stabilizer down. We’re gonna be ready to start camping. Hope these tips helped you on getting a new unit onto your site and thanks for picking Pete’s RV and happy camping.

Pete’s RV Center is an exceptional dealership group serving the United States and Canada since 1952. With multiple locations, Pete’s RV provides sales, service, parts, accessories, and education to our community of RVers all across North America.

How to Clean Your RVs Holding Tank Sensors

petesrvblog RV Buyer Tips, RV Maintenance & Service, RV Owner Tips

Pete’s RV-TV YouTube Channel Resident RV Expert Randy Murray discusses a multitude of ways to clean your gray/black water holding tank sensors, clearing all inaccurate monitor panel readings from your camper. Sometimes you may get a full tank reading on the monitor panel inside your camper even after you’ve dumped your gray and black tanks.

Randy notes that this is generally caused by a build up of waste materials or anything that might have made its way down the toilet. These items can block the sensors preventing the correct read out.

Randy provides a few preemptive approaches to make sure you won’t have to deal with that faulty reading. The first is making sure before you flush that you add extra water so the toilet paper (making sure you use RV toilet paper) won’t clump up or dry out to the inside of the tank walls, the next is making sure the tanks are as full as possible (making sure not to overfill) before they are dumped.

Randy suggests the use of a tank flush chock to assist in filling your holding tank before it’s dumped. The good news is that there are other tools for when all else fails.

The first one Randy recommends is what’s called an RV swivel stick, which he explains attaches to a hose and sprays around water at a high velocity to break down any tank buildup. Depending on whether you own a travel trailer or fifth wheel, a longer flexible version is available for the harder to reach holding tanks.

Lastly, filling up a 5 gallon bucket with hot water and pouring it down the toilet should help alleviate the issue by steaming away the blockage from the sensors.

Video Transcript for “How to Clean Your RVs Holding Tank Sensors | Pete’s RV Service Tips”

Hey guys, Randy with Pete’s RV TV again with you today. Another quick tip segment for you. Have you ever gone out on a camping weekend, and you’ve dumped your tanks after the weekend, and you come back into your camper, and you get a false reading on your black or your gray tank kind of like that.

Looks full and you know it’s not. You just dumped it. Well, I’m going to take you into the bathroom here in just a few minutes, and I’m going to show you a couple of tricks to alleviate that problem for you. So let’s go take a look into a bathroom.

Alright, so here we are in a bathroom at one of the RVs we have here at the shop at Pete’s RV Center. Kind of an awkward place to have a conversation or shoot a video, but here we are anyway. Good information. So as I was mentioning earlier at the monitor panel, you know you’ve dumped the tank but it’s still reading full on you monitor panel.

How this happens is we have black ABS plastic tanks underneath our RV which are our holding tanks, our waste water holding tanks. And we actually spin weld metal sensors into the side of those tanks and hook wires to them that go back to that monitor panel. So we use continuity of what’s in the tank. We especially see this happen on the black tanks because some slime, and some sludge, and whatever else we throw down the toilet gets caught up on those sidewalls and will actually give us that false reading.

So a couple important things I want you to do while you’re camping that will help alleviate this, or make it easier for you to clean it if the problem does arise. when you have solids or paper present in the toilet bowl, I need you to fill up that toilet bowl before you dump.

Obviously if you’re dry camping, this is going to be a little harder for you to do because you want to get as much longevity out of that tank if possible. But if we’re at a campground where we can dump whenever we like, this is a great way to do it. So if there’s solids or toilet present in there, I want to see you fill that bowl up with water. I want to get as much water as I can in that bowl before I dump.

What that’s going to do, is it’s going to do things for us. It’s going to put more water into the tank, and it’s also going to help solidify anything that we put in the tank in conjunction with our toilet chemical. Make sure you’re using the appropriate RV toilet paper.

Any toilet paper that is built for a chemical toilet will work on this. It breaks down a lot quicker than some of the household toilet papers we use for septic systems, so important to do that. So we just fill that guy up and dump it, as much water as we can. Most of your today’s toilets out there will have a way where you can step on it halfway and get some water to it, and that way we’re going to get as much into that tank as possible. If you do that that will help out.

The next thing you need to do, if it does arise, especially when you’re at the campground where you can dump where you want, we’ve got these couple of little options here that work really good. And a lot of today’s new units are coming with sewer sprays on them or some kind of tank wash spray that is hooked up to the side of the unit that actually sprays inside that tank.

Here’s a couple of options that we sell in our store. We call them swizzle sticks in the shop. Heh. You hook the garden hose to this end. It’s got a little on and off valve, and it’s actually got a sprayer that spins around at a very high rate of speed down here and will actually wash the side wall of your tank.

Here’s one that’s a little bit longer. If you own a fifth wheel, this is going to be tough to do because usually the tanks are very far away from the toilet, which are not in a travel trailer situation. So fifth wheels are a little bit tougher to do. So you can use those methods.

Another method that I use when I’m at the campground is before I leave, if my tanks are getting full, I’m going to fill that tank up with water. Now, be careful when you’re doing this because you don’t want to overfill the tank and have a mess or have it come up the toilet, but I want to fill that tank up. A lot of people I see at the dump station here at the dealership, they’ll bring a garden hose in or dump it.

You can also purchase one of these guys here. This is what my prep techs use when they are prepping a camper out to make sure everything’s working properly. They’ll drop that right in and it will keep the water on while it’s filling that tank. Again, make sure you keep an eye on that tank, because if this comes up through the toilet it’s not going to be a fun thing to clean up.

Once you’ve got that tank filled, let it sit for an hour or so. Maybe do it in the morning on the last day there, while you guys are picking up. Then go ahead and pull that valve. Now that water that’s in that tank is probably going to clean those sensors off. Sometimes I’ll even put a little chemical in there. That should clean it off, get everything taken care of for you in conjunction with one of those swizzle sticks there, and the extra water we put in. That should keep those tanks reading clean.

Now, if you have one that’s not … again, typically it’s the black but sometimes I do see it on the gray. You can fill up the gray the same way. Even put a little toilet chemical down the gray and it will help out with odors. Gray odors are just as bad as black odors. I’ve had tanks apart and they really stink. So pour a little toilet chemical down in that gray water you’re using before you dump as well. It’s not going to hurt anything, plus it will keep the sensors clean.

On the really hard to clean sensors, or if you have one now that’s been dirty for a long time and are reading full for a long time and you want to get that one done, warm water. I’ll take and fill up a five gallon bucket, and I’ll dump it down the toilet of an empty tank with, of course, the valve closed on the outside. And the steam from that warm water will actually help loosen up any solids that we might have stuck to one of those sensors inside the tank. I’ve done that on numerous occasions and had very well, great, success with that as well.

There is also product that you can purchase at an RV store that you can put. It’s called a tank sensor cleaner. I put that down in there, or toilet chemical cleaner, or toilet chemical works pretty well as well. And if it, again, it’s one of those tough ones, let it sit in there for 24 hours before you dump. Even if you’ve got to take it home and bring it to the RV dealer a day or two later after letting it sit in there. What that liquid is going to do is, it’s clean liquid, it’s going to just soften up all the material on the side of the tanks that may be giving us that false reading.

Now, on the rare occasion that doesn’t clean it out, you may need to add a new well nut or something on there. We do do that occasionally at the dealership. But those tricks that I’ve just shared with you, that gets it about 95% of the time. Hopefully, if you’ve got one of your tanks and you try my tricks, it’ll help you get that reading at empty so you can have an accurate, you know, know what’s going on in your tanks and know how full they are before you dump them. Really important with the black tank.

Once again, let it fill up as much as you can while you’re using the RV before you dump. This is going to help us evacuate the tank properly and can keep those tank sensors reading clean. And it’s also going to give the chemical enough time to break down the solids and break down the paper.

So use a lot of water if you can, if you’re not in a dry camping situation. If that doesn’t work for you and you still get a false reading, fill the tank up with water, let it sit for as long as you can before you dump. That should clear out. If it’s a real toughy, get yourself five gallons of hot water and dump it down that toilet. Let that sit around for a little while, and that’ll actually steam the sensors. And then you can go ahead and flush the tank really well. And you can try the products that I showed you earlier, the swizzle sticks and things like that.

So hopefully this helps you clean those tank sensors. Thanks again for stopping in, checking out our quick tips with Randy. And always check us out on our Facebook page, and we’d love to see you on the YouTube channel as well. Thanks for thinking of Pete’s RV and happy camping.

Pete’s RV Center is an exceptional dealership group serving the United States and Canada since 1952. With multiple locations, Pete’s RV provides sales, service, parts, accessories, and education to our community of RVers all across North America.

How to Properly Use The Air Conditioner in Your Camper

petesrvblog RV Maintenance & Service, RV Owner Tips, Uncategorized

On the Pete’s RV-TV YouTube Channel, Randy Murray gives a quick important lesson teaching us that air conditioners work by removing warm air and moisture from around the room, which then gets sucked outside leaving the room cooler.

In order to make sure your AC is running properly, Randy shows us how to remove and check the air filter to make sure there isn’t a buildup of dirt and dust hindering performance. Making sure the fan is on will increase efficiently with the AC system, as well as making sure that all doors, windows, and shades are closed to prevent heat from working its way back inside the camper.

Randy advises turning on the AC when temperatures are cooler (typically early morning) for optimal air flow and a cooler camper throughout the day. By using the quick cool option to restrict airflow from the ducts, the AC can effectively cool the room faster and when it reaches a temperature to your liking, airflow can be redirected back through the vents for everyone to enjoy.

To learn more from Randy and stay up to date on all things Pete’s RV be sure to visit and subscribe to our YouTube channel.

Video Transcript | How to Properly Use The Air Conditioner in Your Camper
Randy: Hey guys, Randy with Pete’s RV TV today, another quick-tip segment for you. Today I’m going to talk about air conditioners and the proper way to use them. I’ve been taking a lot of calls around the country and we’re in the middle of our warm season in Vermont, the little warm season that we get up here in the northeast. But people are having trouble with their air conditioners freezing up. People are saying they’re not cooling properly for them. And sometimes that’s the case, but usually it’s operator error about 99 percent of the time.

When I went to RVIA school back a million years ago when I first started in the industry and got certified to do this kind of stuff, one of the first things they taught me about air conditioners is they don’t make cool. They remove heat and they remove moisture, as well. cool just happens to be a byproduct.

So, when we allow our coach to heat up inside, we go to the pool all day, we’re out shopping or doing, visiting the sights around the area and we’ve got the air conditioner off, we go back to our camper at 5 o’clock at night. It’s 100 degrees inside the camper. We turn that air conditioner on. That air conditioner actually has to pull the heat out of the carpet, out of the bedding, out of the couches, out of everything inside before we start to feel cool.

So what I want you to do is I want you to do is turn that air conditioner on in the morning. it’s a little bit cooler at night, so when it’s a little bit cooler at night, of course, the coach stays a little bit cooler. So when you get up in the morning set that thermostat at about 65 degrees, 67 degrees. Let’s maintain that cool from the night before. Now, if we never let our coach heat up, the air conditioner is going to have to work a lot less hard to maintain that cool and we’re actually saving energy.

The other thing that we want to do with our air conditioner, too, is while we maintain it while we’re using it is we want to make sure that the filters are clean. So we can remove that very easily on this guy here and we just want to take this guy out and make sure it’s vacuumed. If it starts to turn brown that usually means there’s a lot of dust.

Another thing that makes an air conditioner work very effectively for us, or makes them work better, is more air flow. So with a clean filter we can get more air through this air conditioner, especially on those [00:02:00] hot, humid days.

the other thing we’ll, we’ll want to do is we want to set our fan on high. I usually use the auto setting on mine, if you let the air conditioner run all day. Again, the more air that we’re moving, the more heat we can take out of the coach and expend outside and put the cold air back inside the coach. So fan definitely on high.

We also want to make sure our doors and windows and vents are closed. I went to a camper on a campground the other day. A lady says, “My air conditioner is not cooling very well. Can you take a look at it?” I went inside. I put my hand up to the air conditioner, it was cooling just fine. What she had was both of her doors were open. She had some vents open, a couple windows open. So what that air conditioner was doing was pulling the heat from the outside and just getting rid of that and returning it so it could never bring the temperature of the coach down because it was just kind of maintaining.

What these guys will do is they’ll actually do about a 20-degree air differential, air temperature differential. So, it sucks in here, blows out here or out through our vents, and it’s going to be about a 20-degree differential. Now, if it’s just pulling air from a door, it’s never going to really bring the temperature of the coach down, so make sure all windows and doors and vents are closed. and again, that high air flow moving through the air conditioner is going to get that heat escape faster and help us with freeze up a little bit, too. The moisture will actually pass over the evaporator coil a lot quicker and not have a tendency to grab on there.

Another thing, we just got to our campgrounds, its 5 o’clock at night, we’ve been traveling all day, inside the camper it’s very hot because it’s a hot day out, so you got to turn your air conditioner on to cool this guy down. Instead of forcing it through the vents, if you’ve got a ducted air conditioner, open up the quick-cool option. This way we’re going to get a lot of airflow and we’re going to cool the coach down a little bit quicker.

Once we bring the temperature down, we can go ahead and close this and we can go through the ducts. The ducts are going to restrict the airflow a little bit, but once we bring the coach down the air conditioner is running efficiently, then we can go ahead and put it through the vents in the ceiling.

So if you try out my quick tips here, run it on high, set it in the morning, let it run all day to keep that cool inside so we don’t have to remove all that heat from building up in the sun all day. Also, if you can close your shades and things [00:04:00] like that, keep the UVs down, that’s going to help out a lot as well.

But all these should help you make your air conditioner work a lot more effectively for you. Save a phone call to me and just have a better camping experience, keep you guys cool. Now, out there having fun, you get hot, you want to come into a cool area, at least I do, and it makes it a lot more fun when you’re drinking a soda or whatever while you’re watching TV, as well.

So thanks again for watching Pete’s RV with Randy today. keep an eye out for our quick tips. Join us on our Facebook page. Sign up [ 00:04:26] on Youtube and happy camping (laughs). Have a great one.

Pete’s RV Center is an exceptional dealership group serving the United States and Canada since 1952. With multiple locations, Pete’s RV provides sales, service, parts, accessories, and education to our community of RVers all across North America.

How to Back Up a Camper

petesrvblog RV Owner Tips

Backing up your travel trailer or fifth wheel can cause stressful and anxious moments when trying to navigate into a tight campsite or driveway. Have no fear! Pete’s RV-TV YouTube Channel Lifestyle Consultant Randy Murray is here to help sharpen your backing up skills.

For starters, always try to pull up to the camper’s final destination on the driver’s side. This allows you to get a better direct and mirror view as you back into a site or driveway. Before proceeding, park and get out of the vehicle to inspect your surroundings. Look for low lying obstacles such as stumps, branches, sink holes and drainage pipes. Inspecting your surroundings also ensures the camper is going to be set up in proper proximity to electrical, water and sewage hookups, and plenty of room to open slideouts.

Randy proceeds to demonstrate a backing up technique (with an Outback Terrain 299TBH) focusing on making the camper’s wheels the pivot point while steering, and then counter-steering as the camper begins to straighten. One of the best takeaways is to unhitch the camper and reposition the towing vehicle if your facing jack-knifing due to limited space for turning. It will save you the grief of pulling forward and back multiple times for minimal results (i.e. the scene from Austin Powers when he is trying to turn the golf cart around in the corridor of Dr. Evil’s lair!).

Video Transcript | How to Properly Use The Air Conditioner in Your Camper

Randy: Hey, guys. Randy with Pete’s RV TV here today. Today we’re on our way to the Lone Pine Campground in Malletts Bay, Vermont. We’re going to show you how to back up a camper and put it on the site. So we’ll be there in just a minute, and we’ll catch up with you then.

    Hey, here we are at beautiful Lone Pine Campground. They’re nice enough to let us use the site today. So, I’m just going to pull past my site. We’re going to be on site 31. I’m going to hop out and take a look at the site and see where I want to put this camper and then we’re gonna go right ahead back around the site.

    Okay, so what I’ve done at this point, and this is the easiest way to put your camper on the site, is I’ve driven past the site, and I’ve got the site on the driver’s side of the truck. I do that on purpose so I can see where the slide side of the off door-side of the camper is going, because that’s the side that we want to keep as far this way as possible to give us more real estate on the usable part of our site. So, if you can all, at all do that when you pull up to your campsite, try to keep the driver’s side on the, on the site’s side, not all the time you’ll be able to do that, but if you can it’s definitely going to work in your benefit.

    So, at this point I just kind of walk the site and see what I’ve got to, that I’ve got to avoid, or if there’s any trees in the way. We see we’ve got a big stump here. I see my power pedestals over here, so I’m gonna wanna keep my camper, keep in mind that I’ve got a slide that’s gonna go out, but I want to keep my camper as far this way as possible to give me as much real estate on that side, as I’ve mentioned before. So, this looks like a pretty open site, which most campsites are. We’ve just gotta contend with the stump there. My power cord’s gonna be in the back, so that’ll work out perfectly for me. So, I guess what I’m going to do now is just hop back in the truck, and see if we can negotiate this guy on the site.

    Hey, so I’m gonna pull ahead just a hair, and I’m going to kind of put the tail on my camper headed in the right direction that I want to back this guy up on. Now, very important at this point is remembering that our wheels are pivot point for our camper. So, that’s where the camper is going to turn, so I don’t want to watch the front of the camper or the back so much, I want to keep my eyes on the wheels. So, here we go.

    And sometimes when I’m driving a different truck, this truck’s working out pretty well, but sometimes I’ll even angle the mirror down so I can see the wheels a little bit better. Want to make sure I got nothing going on on the other side of me. I’m just letting the camper kind of do the job here, keeping an eye on both mirrors; and obviously turn the steering wheel the opposite way that you want the unit to go. And as you start getting close to where you want to be straight, that’s when you want to start counter-steering.

    We’re getting the unit on there pretty straight; nothing on the other side. Well, I think I’m gonna hit this one pretty good right off the bat. Now, if you’re finding that you’re not backing on straight, or you know, that the camper just keeps jackknifing on you a little bit, maybe don’t have enough room in front of the truck to get the truck out where you need it to to get you straight, you always can put the truck back in drive and pull forward and straighten the trailer out. So, if you’ve gone too far…too far past, and the camper’s going the wrong way, or the, the back end of the camper is gone too far the way you don’t want it to go, simply put the truck in drive and pull straight ahead, and that’s gonna straighten the unit out for you.

    So, we’re gonna just back this guy up here. And I think I’ve hit my mark. Now, this is the point where, if you’ve watched my leveling video, is where you want to get out and check the camper for level; so, that’s what we’re gonna do right now. Okay, so that first time went very easy because there’s not a whole lot of people in the park. So, now I’m gonna try to simulate a full park with cars and campers on my other side, and I’m gonna try to keep my vehicle on the road without going on the lawn over there like I did on the last pull-in.

    So, this time I’m going to start backing up a little bit sooner, so I’ve just got my camper kind of headed. And you can see, like with the camper headed, it’s gonna start to turn even with my truck straight. And the camper is just starting to turn more and more, so I’m gonna compensate just a hair now for it. Now, I’m really gonna jack-knife this camper, and try to swing this thing around. Now, I can start to turn my truck a little bit. So, I’ve stayed on the road for the most part, I’ve got my camper pretty straight, but you’ll see that the back end of the camper still wants to swing around because I don’t have enough room in front of the truck to get it to where I want to go, and this is where people mostly run into trouble.

    So, I’ve got a trick for this too. If I keep backing up my back end of my camper’s just gonna keep swinging where I don’t want it to swing. A lot people will go back and forth and back and forth and they never find that happy spot. So, what I’m gonna do at this point, is I’m just gonna stop the truck right here, and I’m gonna unhook the camper. Sounds crazy, but this would get you out of a pinch in a second.

    Okay, so as you can see we turned off the camera. I’m back … I unhooked the truck from the camper, I re-situated my truck, so now my truck is straight in line with the camper, and we can continue to back up on the site, and now we’re not gonna be jackknifing or having the camper off-angle on our site because I’ve now straightened the truck out, and that was out problem. So, I’m gonna hop back in the truck and finish backing up on the site, and we’re gonna be good to go here.

    Okay, so here we go. Back up for our final destination. If you got somebody with you, behind you to keep the, an eye out, not a bad idea. Think that looks good right about there. So, at this point I’m gonna get out and do a couple of the checks that I like to do just to make sure I’ve got enough room. That way we know we’ve got our stump here, so I’m gonna do my arm check. We’ve got plenty of room there. I’m right off my electrical box, my electrical cords gonna be here, so I’m within my 25 feet here. I think this looks like a great spot. I’m gonna run the slide-out out, and put, check the levels on the front of the camper, and see if we’re level and then we’re gonna take it from there.

    So, in a nutshell, a lot of people get intimidated by this, it’s a really simple process. Don’t care about anybody watching me. I’m just focused on what I’m doing. Does take a little bit of practice, you’re not gonna hit the mark on the first time out, but the more and more you do it, and the less you worry about other people watching you, the easier it’s gonna be for you. So, just follow my quick steps, make sure you watch your wheels, watch your mirrors, if you can’t get the camper exactly where you want, unhook the truck and re-situate the truck, and the next time you’ll be right on the site right where you want it.

    So, thanks again for watching Pete’s RV TV, with Randy today. New segment here for you, hopefully this’ll help with make your camping a little bit easier. Check out our other videos. Check out our YouTube channel, as well as our Facebook page. We’ve always got a great information on there as well. So, thanks again for watching Pete’s RV, and happy camping.

Pete’s RV Center is an exceptional dealership group serving the United States and Canada since 1952. With multiple locations, Pete’s RV provides sales, service, parts, accessories, and education to our community of RVers all across North America.

Recap of the Pete’s RV 3rd Annual Campground Road Show at Bayley’s Camping Resort

petesrvblog Pete's RV Center, Pete's RV Center News

During the heart of leaf peeper season, in the coastal town of Saco, Maine, we found ourselves at the luxurious Bayley’s Camping Resort for Pete’s RV Center’s annual Campground Road Show.  For the third straight year, we treated campground guests to a wide selection of this season’s best selling Jayco motorhomes, travel trailers, and fifth wheels.

Campers excitedly approach our new display

Typically located by the Troy Pond section of the campground, we found ourselves in a new area this year. Being located next to the parking lot outside of the Little River Complex, the campground guests were treated to a display with even better accessibility. Being able to connect our RVs allowed us to show at their best. So even though we missed out on the beauty Troy Pond provided as a backdrop, the new display space was a hit!

The beautiful foliage around Troy Ponrd

The Jayco product line featured at this year’s Bayleys RV Road Show did not fail to impress. Two of the biggest standouts were the Eagle 332CBOK travel trailer and the North Point 381FLWS. The Eagle 332CBOK travel trailer is a brand new floor plan for 2020 and put campers in awe with its modern farmhouse interior and rustic center bar! The North Point 381FLWS shone bright with its six slide out rooms, and breathtaking front living room with automotive-style windshield. 

The North Point 381FLWS aimed to please!

With another year in the books, the Pete’s RV show crew sends our heartfelt thanks to everyone at Bayley’s Camping Resort for making the event a success. We can’t wait to see you all with our new collection of RVs next Columbus Day Weekend!

We are eager to see everyone again next year!

Pete’s RV Center is an exceptional dealership group serving the United States and Canada since 1952. With multiple locations, Pete’s RV provides sales, service, parts, accessories, and education to our community of RVers all across North America.

Pete’s RV Named Top Ten Jayco Towable Dealer

philleclair General RV, Jayco, Pete's RV Center News

Announced during the awards dinner at Jayco, Inc’s annual Dealer Homecoming, Pete’s RV Center was announced number three in the category of Top Ten Towable Dealers for Model Year 2018.

IMG_4586Pictured Left to Right:  Matt Thompson, Wilbur Bontrager, Phil LeClair, Chad Shepard, Nick Campbell, Rocky Holman, Randy Murray, Bertha Bontrager, Derald Bontrager.

Their South Windsor, CT store led the charge with the sale with a combination of nearly seven hundred Jayco travel trailers and fifth wheels.  An outstanding achievement considering Pete’s RV Center was not ranked in the top ten last year.

“It was difficult walking out of the awards ceremony last year knowing we had just missed the cut for top ten.  That disappointment diminished with this year’s announcement”, reflected co-owner Chad Shepard.  “It was a thrilling moment accepting the award from Jayco’s founding family, the Bontragers.  I did so on behalf of everybody at Pete’s RV who worked so hard to help propel us into the number three ranking.”

Established in 1968, Jayco, Inc., manufactures and markets towable and motorized RVs through its Jayco, Starcraft, Entegra Coach, and Highland Ridge RV divisions.

Original Release:  https://www.prlog.org/12726431-petes-rv-named-top-ten-jayco-towable-dealer.html

Pete’s RV Center is an exceptional dealership group serving the United States and Canada since 1952. With multiple locations, Pete’s RV provides sales, service, parts, accessories, and education to our community of RVers all across North America.

Airstream Debuts Smart Control Technology

petesrvblog Travel Trailers, Uncategorized

Editor’s Note: Airstream is at it again! First Nest, then Basecamp X, now Smart Technology. Starting in 2019, the Classic is going to be equipped with an application that allows owners to access key information about their Airstream from a mobile device as well as improving access to the internet in the most remote locations. Most impressive, indeed!

The 2019 Airstream Classic features an unprecedented level of digital capability to provide owners with connectivity, comfort, and control

Jackson Center, Ohio (August 2, 2018) – Airstream, innovative maker of the iconic “silver bullet” travel trailers, has announced that its 2019 Classic models will feature the company’s Smart Technology, which digitally connects owners to their RVs for a more enjoyable camping experience.

The integrated, Airstream-designed Smart Technology and connectivity solution is the first of its kind developed and produced by an RV manufacturer. Fueled by extensive consumer research and the opportunity to lead the industry, Airstream’s new platform will transform how customers interact with and use their recreational vehicle.

“Digital technology has improved almost every aspect of our lives,” said Airstream President and CEO Bob Wheeler. “Shouldn’t it make camping better, too? We think so. That’s why, in keeping with our commitment to innovation, we’re leading the way with our new Smart Control Technology and connectivity solution, starting with our Airstream Classic travel trailers.”

The Smart Control Technology enables 2019 Airstream Classic owners to control and monitor systems and amenities from anywhere – keeping them connected to the comforts of home, even when they’re far from it. Lighting, HVAC, awning, vent fans, water, propane and battery levels, and more can all be controlled and monitored remotely with an intuitive app – creating a more comfortable camping experience every time.

To view the rest of this article by Airstream, click Here!

Pete’s RV Center is an exceptional dealership group serving the United States and Canada since 1952. With multiple locations, Pete’s RV provides sales, service, parts, accessories, and education to our community of RVers all across North America.

Pete’s RV Top 10 Basecamp Dealer

petesrvblog Pete's RV Center, Pete's RV Center News, Pete's RV Vermont, Uncategorized

Airstream Inc. recently honored its top dealers based on retail units sold between May 2017 and May 2018.

According to a press release, South  Burlington, Vt.-based Pete’s RV earned a No. 6 ranking in Basecamp sales, representing the first time a first-year Airstream dealer had placed in the top ten.
                                                      Pete’s RV achieved the top ten ranking in Basecamp sales in less than the normally allotted 12-month period as the dealer sold its first unit in mid-July. Also during the period, five of Pete’s RV sales consultants achieved Master Sales Certification status for travel trailers.
                                                                                                                                                                                                                                                                                                                        For more information or details on starting your own Airstream adventure, click here.
Pete’s RV Center is an exceptional dealership group serving the United States and Canada since 1952. With multiple locations, Pete’s RV provides sales, service, parts, accessories, and education to our community of RVers all across North America.

Pete’s RV Center Officially Retires Van’s RV Center Name on Connecticut Store

philleclair Pete's RV Center News, Uncategorized

Pete’s RV Center acquired Van’s RV Center in South Windsor, Connecticut back in September 2015, but did not publicly change their name until a recent grand re-opening sales event.  In June, the transition was finalized with the Van’s RV Center sign being lowered for a Pete’s RV Center replacement.

IMG_2837

The storefront with new Pete’s RV Center sign located at 417 John Fitch Boulevard in South Windor, CT.

“It was an honor for us to continue operating under the Van’s RV name beyond acquisition,” says marketing manager Phil LeClair.  The family ownership ran an outstanding business since 1963.  They were a fixture in the community and reached thousands of customers throughout New York and New England.  We are delighted to be carrying on their legacy as Pete’s RV.”

The Connecticut location is Pete’s third dealership.  The original location in South Burlington, Vermont has been operating since 1952.  A second location in Schererville, Indiana was acquired from Rollin-On RV in May 2011, and a fourth in Plainville, Massachusetts in February 2018 from Macdonald’s RV.

Pete’s RV Center is an exceptional dealership group serving the United States and Canada since 1952. With multiple locations, Pete’s RV provides sales, service, parts, accessories, and education to our community of RVers all across North America.